Bissell Vacuum Cleaner 21K3 User Manual

2.0

Out of 1 Ratings

Owner's of the Bissell Vacuum Cleaner 21K3 gave it a score of 2.0 out of 5. Here's how the scores stacked up:

  • Reliability

    1.0 out of 5

  • Durability

    1.0 out of 5

  • Maintenance

    1.0 out of 5

  • Performance

    5.0 out of 5

  • Ease of Use

    2.0 out of 5
of 16
 
13
www.bissell.com 800.237.7691
Troubleshooting
Vacuum cleaner won’t turn on
Possible causes Remedies
1. Power cord not plugged in 1. Check electrical plug
2. Blown fuse/tripped breaker 2. Check/replace fuse or reset breaker
Vacuum cleaner won’t pick up dirt
Possible causes Remedies
1. Incorrect height adjustment 1. Adjust powerfoot to correct height setting
2. Hose not attached to suction opening 2. Grasp quick reach handle and firmly push
hose wand onto the suction opening
3. Crack or hole in hose 3. Check hose and replace if needed
4. Broken or worn drive belt 4. Replace drive belt, see page 11
5. Rotating floor brush bristles worn 5. Replace brush
6. Rotating floor brush jammed 6. Remove brush and clean debris from brush ends
7. Clog in vacuum 7. Follow instructions on page 12 for clearing clogs
8. Dirt container full 8. Empty dirt container
9. Dirt container or upper tank not installed properly 9. Position correctly and lock in place
10. Filters are dirty 10. Check and clean pre-motor and
post-motor filters
Tools won't pick up dirt
Possible causes Remedies
1. Crack or hole in hose 1. Check hose and replace if needed
2. Clog in vacuum 2. Follow instructions on page 12 for clearing clogs
3. Dirt container full 3. Empty dirt container
4. Dirt container or upper tank not installed properly 4. Position correctly and lock in place
5. Filters are dirty 5. Check and clean pre-motor and
post-motor filters
Vacuum cleaner is difficult to push
Possible causes Remedies
1. Incorrect height adjustment 1. Adjust powerfoot to correct height setting
Visible dirt escaping from cleaner
Possible causes Remedies
1. Dirt container full 1. Empty dirt container
2. Filters missing or installed incorrectly 2. Check pre-motor and post-motor
filters for correct installation
Other maintenance or service not included in the manual should be performed by an
authorized service representative.
Thank you for selecting a BISSELL product.
Please do not return this product to the store.
For any questions or concerns, BISSELL is happy to be of service.
Contact us directly at 1-800-237-7691.

   Find Your Products By Category